Loading

All Products in the Shop is now sold with 60% discount.
Orders will be packed and send every Sunday.

There can be problems when paying with PayPal, Mastercard and Visa.
The Order is registreted anyway.













KSB4 Servo Control

-60%
KSB4 EasyBus Servo Control
Reference: 5676

In stock

Amount in stock: 
2
Price:   DKK 95,68
Price incl. VAT:   
DKK 95,68


Product information "KSB 4 servo control"

Highlights & Details
Plug & Play solution
Four additional servo outputs
Adjustable via Control Panel
• Proportional functions (eg for power steering)
Digital functions (eg fifth-wheel coupling, ramp or flaps)
middle positions, rotational speeds and directions of rotation adjustable
No programming skills required
PC - downzuloaden software free

Technical specifications:
Dimensions: 28x40x11mm
Number of servo outputs: 4 
Number of switching contacts: 0
Power supply: over the EasyBus
Max. Power consumption: 30mA

By KSB 4 Expand your EasyBus system to four freely adjustable servo outputs.

The KSB4 is connected to the EasyBus line and to a free receiver output or an external BEC to EasyBus line to relieve current alone.

The following functions are available:
Proportional function
(Link the power output with one of the input channels.
Possible applications
An additional steering servo, control a mechanical brake (just the decisive factor for gas to zero)

Proportional switched function (Link the power output with one of the input channels and turn it on when needed or off)
Possible applications
A steering servo for a lifting axle (steering function with lifted axle disabled), four-wheel steering, auxiliary drive

Two positions (The servo moves from one end position to the other, depending on a switching function. Additional function or even of the basic lighting functions (for example, brake light))
Possible applications
Lifting a lifting axle, driving ramps and flaps

Two positions center position (The servo moves from one end position to the other and stop in the middle position, depending on a switching function. Additional function or even of the basic lighting functions (for example, brake light))
Possible applications
Control of ramps and flaps

Actuator (With this function it is possible to obtain a servo at the speed specified in the general settings as long to move as the set button is pressed or until the end position has been reached. The first adjustment item moves the servo from A to B, and the second from B to A. The best way this feature is to use the continuous function (active, as long as the button is pressed)
Possible applications
Control of ramps and flaps

Hydraulic simulation (Move a servo such as a hydraulic cylinder: If the stick is only lightly pressed, the servo moves slowly. If the stick is moved further toward full-scale deflection, also the servo moves faster. Is the stick in the middle, the power remains in the current position. There are several speeds selectable.)
Possible applications
Simulation of a hydraulic cylinder, but also the control of the steering servo is conceivable (the servo does not jump into the center position when the stick is released.

Fifth wheel servo "Skamler" (Opens or closes the fifth wheel, when the additional function is "right just fully" selected.)
Possible applications
Driving the fifth wheel servos

Trailer supports (This function controls the devices connected to the power output of the speed controller trailer supports. The trailer supports drive on or off, as long as the additional function is the left half or right half-selected (when after about half a second a): K2 is on level addition and K1 is kept at half scale). If you use the infrared receiver Kieb 0/2/1, the trailer supports can be controlled via the engine output.)
Possible applications
Driving the trailer supports

Trough (This function controls the devices connected to the servo output speed controller a tipping hopper. The tray moves up or down, as long as the left or right full fully selected additional function (when after about half a second a): K2 is on level addition and K1 is kept in full scale). If you use the infrared receiver Kieb 0/2/1, the trailer supports can be controlled via the engine output.)
Possible applications
Driving the trailer supports

Windshield wipers (This function can be simulated with a servo a fully functioning windscreen wipers. (Incl. Interval operation, slow and fast operation))
Possible applications
Realization of a windscreen

Searchlight (This feature automatically moves from one end-point to another)
Possible applications
Realization of an automatic search light or an automatic water cannon.


________________________________________________________________



________________________________________________________________

Wishlists
Nyheder
Kardan mellemled

Kardan mellemled

DKK 75,20

More
RC Tool Set 8 pcs.

RC Tool Set 8 pcs.

DKK 76,80

More
Servonaut DC72 converter

Servonaut DC72 converter

DKK 70,40

More
Ball Head M4 with 3,0mm hole

Ball Head M4 with 3,0mm hole

DKK 14,08

More